Dh38ms

Bosch 1-9/16-Inch SDS-Max Combination Rotary Hammer RH540M

Bosch 1-9/16-Inch SDS-Max Combination Rotary Hammer RH540M
  • EFFICIENT: With Varo-Lock Positioning, the rotary hammer rotates and locks chisel into 12 different positions to optimize working angle. The tool also comes complete with service minder brushes to notify users when maintenance is needed.
  • POWER: This rotary hammer provides the best in class impact energy of 6.1 ft.-lbs. Weighing only, 15.2 lbs., the RH540M provides maximum productivity in all day drilling and chiseling applications.
  • more
  • POWER: This rotary hammer provides the best in class impact energy of 6.1 ft.-lbs. Weighing only, 15.2 lbs., the RH540M provides maximum productivity in all day drilling and chiseling applications. ;
  • VERSATILE: The RH540M features a combination dual mode selector knob to allow users to select between hammer drilling, chiseling only and the Vario-Lock function. ;
  • CONVENIENT: The Bosch RH540M Combo Rotary Hammer features the SDS-max Bit System for tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate. ;
  • VARIABLE SPEED: The variable speed dial allows for controlled drilling and chiseling applications. The motor is rated at 170 to 340 RPM in rotary mode and 1,200 to 2,750 BPM in hammer mode, which will easily reduce concrete to dust. ;
$363.30Add to cart

Hitachi DH38YE2 1-1/2-Inch Spline Shank Rotary Hammer, 2 Mode

Hitachi DH38YE2 1-1/2-Inch Spline Shank Rotary Hammer, 2 Mode
  • Two modes of operation - hammer only and hammer drilling controlled by the simple turn of a knob
  • Safety clutch shuts down rotation in the event of a bound bit for improved user protection
  • Soft elastomer handle provides a secure grip and absorbs vibration for comfort and control during operation
  • more
  • Soft elastomer handle provides a secure grip and absorbs vibration for comfort and control during operation ;
  • Sealed grease system adds to the tools maintenance free operation ;
  • Low vibration levels of only 18.8m/s2 (full load) for more comfortable operation in hand ;
  • Low noise levels of only 95.2 dB (full load) for a less noisy work environment ;
  • Powerful 8.4 Amp motor delivers 950 watts of input power for maximum productivity ;
  • Adjustable 360 degree side handle provides better control and can be removed easily ;
  • Produces 5.9 ft/lbs of impact energy for faster drilling and chiseling through concrete ;
  • Dust resistant cover protects the tool from dust and debris and prolongs tool life ;
Add to cart

Hitachi 331206 Case Plastic Carry

Hitachi 331206 Case Plastic Carry
  • Designed to the highest standards
  • Rigorously Tested for both performance and durability
  • 30-Day Warranty
$71.29Add to cart

Hitachi 331210 Slip Clutch Assembly DH38MS Replacement Part

Hitachi 331210 Slip Clutch Assembly DH38MS Replacement Part
  • For use on Hitachi power tool products
  • Genuine Hitachi power tool replacement part
  • Go to hitachipowertools for warranty information
$62.99Add to cart

Hitachi 331253 Gear Cover DH38MS DH38YE2 Replacement Part

Hitachi 331253 Gear Cover DH38MS DH38YE2 Replacement Part
  • Genuine Hitachi power tool replacement part
  • Hitachi 331253 Gear Cover DH38MS DH38YE2 Replacement Part
  • For use on Hitachi power tool products
$36.88Add to cart

Hitachi 331523 Crank Case DH38MS DH38YE2 Replacement Part

Hitachi 331523 Crank Case DH38MS DH38YE2 Replacement Part
  • Go to hitachipowertools for warranty information
  • For use on Hitachi power tool products
  • Genuine Hitachi power tool replacement part
$68.35Add to cart

Hitachi 331524 Retainer Sleeve DH38MS Replacement Part

Hitachi 331524 Retainer Sleeve DH38MS Replacement Part
  • Genuine Hitachi power tool replacement part
  • For use on Hitachi power tool products
  • Go to hitachipowertools for warranty information
$55.25Add to cart

Hitachi 331526 Cylinder DH38MS Replacement Part

Hitachi 331526 Cylinder DH38MS Replacement Part
  • Genuine Hitachi power tool replacement part
  • For use on Hitachi power tool products
  • Hitachi 331526 Cylinder DH38MS Replacement Part
$40.96Add to cart

Hitachi 360875U Armature Assembly 120V DH38YE2 Replacement Part

Hitachi 360875U Armature Assembly 120V DH38YE2 Replacement Part
  • For use on Hitachi power tool products
  • Go to hitachipowertools for warranty information
  • Genuine Hitachi power tool replacement part
$76.37Add to cart

Makita HR4002 1-9/16-Inch SDS-MAX Rotary Hammer

Makita HR4002 1-9/16-Inch SDS-MAX Rotary Hammer
  • HR4001C
  • Side Handle (158131-0)
  • One-touch sliding chuck for quick bit changes
  • Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts resulting in up to 50% faster drilling
  • HR2621
  • Built-in torque limiting clutch disengages if bit jams
  • more
  • Built-in torque limiting clutch disengages if bit jams ;
  • Bit Grease (194683-7) ;
  • Soft grip helps reduce the level of vibration felt by the end-user ;
  • HR5000 ;
  • Powerful 10.0 AMP motor delivers 2,500 BPM for the most demanding applications ;
  • Automatic brush cut-off protects commutator from damage for longer tool life ;
  • HR4041C ;
  • 12 bit angle settings allow the bit to be set at different positions for operating convenience ;
  • Soft grip handle provides increased comfort on the job ;
  • HR5210C ;
  • inchNo hammering when idling inch functions helps increase tool life ;
  • HR1830F ;
  • One-touch sliding chuck for quick & easy bit changes ;
  • Dual mode operation Rotation with hammering and Hammering only make this tool ;
  • HR2475 ;
  • HR2432 ;
  • HR2470F ;
  • HR2475X2 ;
  • HR3210C ;
  • Depth Gauge (321248-4) ;
  • Powerful 10 AMP motor delivers for the most demanding applications ;
  • HR2811F ;
  • 2-mode operation for inchHammering Only inch or inchHammering with Rotation inch ;
  • Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life ;
  • Accepts SDS-MAX bits ;
  • Tool Case ;
  • HR2811FX ;
  • HR4510C ;
  • HR2611F ;
  • HR4013C ;
  • HR4010C ;
  • Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds ;
Add to cart

Hitachi DH38MS 950W SDS-Max Hammer Drill from Toolstop

- click to BUY! Check out our demo of this 2-mode SDS+ hammer drill .

Hitachi DH38MS 950W SDS-Max Hammer Drill 38mm 110V

Hitachi DH38MS 950W SDS Max Demolition Hammer Drill The Hitachi DH38MS is a powerful 950W SDS Max Demolition Hammer Drill with 2-mode action and SDS-max s.

Hitachi DH38MS vs Ryobi ED450E

Popular pages

Bosch 1-9/16-Inch SDS-Max Combination Rotary Hammer RH540M

Bosch 1-9/16-Inch SDS-Max Combination Rotary Hammer RH540M

Relevant pages

Byrd Tool Shelix cutterhead for Dewalt planer DW735

Byrd Tool Shelix cutterhead for Dewalt planer DW735

6 BiMetal Oscillating Saw Blades: Extra Long Metal&Wood Titanium Tip Blades, Compatible with Fein Multimaster Porter Cable Craftsman Ridgid Ryobi Makita Milwaukee Dewalt Rockwell Chicago

6 BiMetal Oscillating Saw Blades: Extra Long Metal&Wood Titanium Tip Blades, Compatible with Fein Multimaster Porter Cable Craftsman Ridgid Ryobi Makita Milwaukee Dewalt Rockwell Chicago

Hitachi 360594U Armature 120V G18Se3 Replacement Part

Hitachi 360594U Armature 120V G18Se3 Replacement Part
dws780.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com

It is interesting?

Share it